Language
arabic
The cramming in copiers has a variety of types, including paper cramming and federal cramming, and finally cramming the heater, and as the last of the most important parts inside the copiers in general, we will talk about in this article.
Reasons for cramming the heater
There are several factors that lead to cramming in copiers, and we can talk about them as follows:
1- Manicure heater:
Function added the heater Adjust the paper path inside the heater, after exiting the DRAM.
But with frequent use erosion of these nails, and thus fail to perform its basic function, and thus talk crammed into the heater.
2 - upper roller
Roller is one of the causes of the insect can be photographed documents with frequent use has erosion, which leads to the occurrence of insect.
Sometimes the heater's nails erode as a result of pressure, leaving lines in it.
But you should know that the quality of the roller plays an important role in overcoming the problem of cramming the heater, so you should choose the best ones.
3 - Lower Roller
It is made of teflon, which is corroded as a result of frequent use, which leads to «crunch» paper before entering the heater.
4 - the presence of ink on the cooling X.
With frequent use of photocopiers, toner builds up on the cooling x, causing the heater to be jammed.
The procedure that must be followed here is to clean only the cooling x, so that the copier works again with high efficiency.
5- Wrong paper sizes
In a previous article titled “Paper cramming in copiers… 4 reasons you don't know,” we talked about the importance of paper in not cramming.
The customer should make sure of the paper sizes used, since any increase in them leads to a jam.
The foregoing is what causes the heater to be crammed into the photocopiers, so you should make sure that the heater's nails, upper and lower rollers are clean and that the machine's X-cooling is cleaned.
In conclusion, we must ensure the integrity of the components mentioned above, in order to avoid the problem of jamming paper in photocopiers