England flag Language
Quotation Request
Register & Login
::before
Call us now +201101017272
0 Items Shopping Cart

How to deal with Xerox 5755? Learn about the most famous breakdowns and solutions

How to deal with Xerox 5755? Learn about the most famous breakdowns and solutions

Xerox 5755 is one of the most widely used photocopiers in the Egyptian market. with her.

 

With Al-Ansar you will not find it difficult to deal with Xerox 5755 black and white machine malfunctions

Message Replace Fuser Module

Sometimes the Xerox 5755 machine refuses to execute any order and issues a message: please .. Replace Fuser Module, which indicates that the malfunction is damaged or malfunctioning.
According to this letter, the heater is the main cause, and the probability of failure is as follows:

 

The deviation of the heater from the right place, which results in the absence of youth in the right place, which leads to this message, and deviation occurs as a result of the introduction of the heater and embarrassed more than once.
Here you must re-enter the heater correctly, the youth will return to its rightful place, and work again.
The lifespan of the youth is estimated to be 100,000 copies, so it must be changed.
Exhaust or ink on the Alshbayh flower, which leads to not working properly, which leads to disruption, and the solution here clean well.

 

Crammed into the heater

We all know that the normal path of the paper begins with its exit from the tray and then to the dram, then it moves to the heater to fix the ink on the paper, then to the exit group at the end of the stage, or move to the duplex to print the second face.

 Sometimes the paper breaks down at the heater causing an insect in the Xerox 5755, which has many reasons:

 

Manicure heater:

There are many possibilities, which can cause the insect, as follows:
  • The ink clumps on the heater's nails or a single nail, blocking the paper path in the heater causing the insect, and the machine stops working.
  • The solution is to clean the nails thoroughly from the lumped ink.
  • The nail is broken or completely damaged, and therefore must be changed, and sometimes the nails deviate from their proper place, and when returned to their place the insect stops.
  • The nail ruler sensor is damaged or damaged, affecting its work causing an insect, and here the ruler should be completely changed.

Oiler Roll:

Correctly working the oiler has a significant role in the non-occurrence of the insect, it reduces the temperature of the heater, cleans the upper roller, and reduces the moisture of the paper.

There are two possibilities of an insect in the heater:

 

  • The roller is cut, which prevents the paper from moving in its normal course inside the Xerox 5755, removing the cut and replacing it again.
  • Roller finishes, which leads to the accumulation of ink on the top roller, which hinders the paper path, the solution here is to change the heater roll.

 

Message Replace toner cartriage

Sometimes the ink circle of the Xerox 5755 is malfunctioning, causing the ink not to reach the diffuser tank, which is responsible for placing the ink on the paper, disrupting the printing process and producing a “Replace toner cartriage” message.

This imbalance has several possibilities, as follows:

  • There is no ink in the cartridge, and therefore must be replaced with an original one.
  • Mink tin.
It is responsible for moving the cartridge continuously during the printing process until the ink reaches the developer's tank.There are two possibilities that may cause the ink circle to malfunction:
  • The presence of lumpy ink on the motor, which affects how it works, which leads to disruption, and here you must clean the lumpy ink on it.
  • Damage the motor itself or the electronic board that occupies it, here must be changed complete.

Xerox 5755 does not receive the print command from the computer

The Xerox 5755 refuses to receive any order for printing through the PC or intranet, which has more than one possibility:

 

  • Do not identify the machine on the machine from which you print, and this problem ends with the definition of the definitions of the machine.
  • Damage or failure of the data bus or network cable connecting the Xerox 5755 to the computer from which you are printing.
  • Sometimes the problem is from the PC you are printing from. Some malware may prevent the print command from accessing the machine.
Similarly, the problem may be in the machine itself, as its software fails or fails to work, does not receive the printing command, it must be soft new (warehouse) of the machine.

 There are many other malfunctions that appear in the Xerox 5755, but we will talk about them in other old_articles to come, providing you with the best solutions to deal with these malfunctions.